Products

new but old silencer tubes for team calamari exhausts  sold as a pack of three. 

Silver old school team calamari silencer    USED PART - SOLD AS IS - NO RETURNS, REFUNDS, OR CANCELLATIONS! 

Store a couple of spark plugs, and jets with this handy dandy spark plug caddy from SP1 *spark plug not included

Spark Plug caps actually wear out causing intermittent running problems. Replace it!    

Use this ignition spark tester to check the condition of the ignition system at each cylinder between the spark plug and spark plug wire

Indexed Spark Plugs align the open end of the electrode towards the intake port. The hottest flame meets the new fuel charge for a performance gain...

Universal T handle spark plug tool. Works on any 13/16 (21mm) or 5/8 (16mm) spark plug.  The sockets included also have an external hex drive and a...

You don't need to haul your ratchet, and socket with you anymore for changing plugs. This simple,  spark plug wrench, solves your problems with eas...

High Performance Spark Plugs for your Zuma 125 and Zuma 50F Copper: NGK CR7E 4578  

It is important that you use a short reach extended tip NGK's Standard Plugs are Constructed for Longer Life and Optimum Performance Trivalent Met...

These are the standard Zuma Plugs. The 7 is the hottest and the 8 is the coldest. The 7 is standard from the factory. Most folks run an 8. It is im...

It is important that you use a SHORT reach plug! NGK's Standard Plugs are Constructed for Longer Life and Optimum Performance Trivalent Metal Plat...

New Product!! The Spectro brand Power Chain Clean is for all types of chain driven vehicles. It effectively removes stubborn dirt and debris. The S...

Here's some fresh new spring clips for your scooter! These are universal for any scooter that uses them. 

Tired of using your flathead screwdriver and poking your eyes out trying to remove exhaust springs and clutch spring? Then this is the tool for you...

Steel Front Sprocket Original Stock Gearing (Front / Rear): 12/44 YSR 50  Original Stock Gearing (Front / Rear): 14/37 YSR 80Chain Size: 420Availab...

These are made in USA original chain size for YSR50/80 Aluminum Rear Sprocket - 7075 T-6 Aluminum Original Stock Gearing (Front / Rear): 12/44 YSR ...

Billet Aluminum Rear Sprocket for YSR Made in the USA Super light weight   This is for the standard YSR 420 Chain We also have sprockets that fit t...

Longer Rear Hub studs for 428, 520 sprockets (can't get the nut on with the stock studs, sprockets way thicker) Sprocket nuts-Aircraft Quality Spro...

Fuel Storage Stabilizer doubles as a fuel stabilizer and corrosion inhibitor. Not all brands offer protection from the harmful effects of ethanol a...

Stainless Steel Allen Head Crankcase Set NO Rust!  

Set of 2 Shoulder Bolts that can help with the alignment between our YSR50 Billet Intake Manifold and a Mikuni Carb. COLOR MAY VARY BETWEEN RAW OR ...

Starter Motor