Products

These gauges are a MUST for tuning your bike. Knowing your temp of your bike is absolutely necessary for tuning, and keeping your bike from seizing...

Simple, yet high tech, and super informative and useful motorcycle computer. This will read your engine temperature, rpm, time, speed. Super easy t...

In line resistors for turn signals, these are required when switching from incandescent bulbs to LED 

Turn Signal Lens '02-'11 (front, rear, left, right, all the same)

Upgraded exhaust stud kit for zuma 50, all years. These are nice to have when installing an aftermarket exhaust, and also greatly reduce the risk o...

USED YSR Inner fork tubes!  Includes bushing, piston, clip, and ring.  Sold individually  Fork bottoms / Outer tubes available here and here (pairs...

YSR50 Clutch Cover / Right Crankcase cover  Used in functional condition, but you may want tot clean them up, and give them a fresh coat of paint i...

USED YSR fork bottoms Sold as pairs - these are the nicer ones we have!  Select the options from the photos to pick which fork bottoms you order! U...

USED YSR oil pump cover select the option in the drop down menu to select which oil pump cover you get!  USED PART - SOLD AS IS - NO REFUNDS - NO R...

USED YSR50 shift drum, cleaned and coated with a corrosion inhibitor.  This includes the middle shift fork, and gear selector star.  SOLD AS IS - N...

YSR50 used wheel and tire.  I would not recommend using the tire.  USED PART - SOLD AS IS - NO RETURNS, REFUNDS, OR CANCELLATIONS. 

Used OEM (except #4) zuma 50 cylinders.  I would recommend getting new gaskets and circlips before installing these.  #4 is a 48mm (72cc) charmo bi...

POLINI VARIATOR YAMAHA Zuma 125cc  The Variator is a small, but very important tuning part in the scooter - the heart of each automatic scooter mot...

Polini Variator for the Zuma 50F 4-Stroke Scooter The Polini variator is great for upgrading your Yamaha  Zuma 50 4-Stroke. One of the best variato...

OEM Variator One way Clutch '89-'01    

This is the assembly behind the Variator, that can be pulled out by mistake when installing new variator. When that happens the 3 little spring loa...

Nut for end of shaft    

Variator shims, these will fit every year zuma 50. These are used to adjust belt fitment at idle. 

Variator Sliders are the spacers between your variator pulley and the back plate. Regular service of these guides is often overlooked and may cause...

Variator Sliders are the spacers between your variator pulley and the back plate. Regular service of these guides is often overlooked and may cause...

This is the assembly behind the Variator, that can be pulled out by mistake when installing new variator. When that happens the 3 little spring loa...

OEM Claw Washer This is the washer that sits in the fan and has splines.      

Kit Contains: Two Sealed Both Sides  Bearings Seal The YSR is at least 30 years old, time to replace the wheel bearings! Please use drop down men...

Kit Contains: 2 Sealed Bearings 1 Hub Seal (OEM)