Transmission

Performance 3 shoe clutch from NCYPerformance clutch from NCY. With high friction pads, this is a great upgrade for a stock or performance machine....

This NCY adjustable secondary sliding sheave has two sets of ramp angles, one steeper than the other. These allow you to adjust how quickly the pul...

Super Light Weight Clutch Bell for NCY Clutches NCY Racing Clutch Bell(Teflon Coated, Star); Zuma 50  Lightweight! '08-'11 or NCY Clutch 107mm  

This is the assembly behind the Variator, that can be pulled out by mistake when installing new variator. When that happens the 3 little spring loa...

DrPulley HiT Clutch  Yamaha Zuma '89-'11 & 50F & C3 Dr.Pulley high performance clutch HiT 161310 Get quicker, harder launches & positiv...

This is a very nice quality pressure plate by NCY for the Zuma & other 50cc 2T scooters.

38mm Clutch Nut that holds Clutch shoes to axle (41mm = 1 1/2") Same as the 41mm clutch nut but less expensive - no compromise in quality (it is a ...

Fix that common Zuma bog during acceleration. Our upgraded pulley has three separate angles to dial your bike in. It's super easy to install and co...

OEM Fan for Variator (Check the splines!)  

High efficiency Fan by Malossi!

OEM Yamaha Part 3XY-E7623-00

OEM Fan for Variator Primary Fixed Sheave Fits years 2014-2019, Zuma 50F

These Dr Pulley sliders differ from rollers, as they don't roll in the variator, they slide. These sliding rollers perform better than standard rou...

NCY Torque Spring Torque springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which th...

Get better acceleration by upgrading your clutch springs! RPM NCY clutch springs, set of 3. Clutch springs help determine the RPM that the clu...

Variator Sliders are the spacers between your variator pulley and the back plate. Regular service of these guides is often overlooked and may cause...

Dr. Pulley sliders are the most advanced tuning weight you can use in your variator!  These differ from rollers, as they don't roll in the variator...

OEM Claw Washer This is the washer that sits in the fan and has splines.      

Nut for end of shaft